{"title":"Ash Wasteland","description":"","products":[{"product_id":"comms-tower-tesseract-tomb","title":"Comms Tower - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Comms Tower are a part of the Towers of the Wasteland Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528830419258,"sku":"TTCT","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1188.jpg?v=1751359465"},{"product_id":"wind-turbine-tesseract-tomb","title":"Wind Turbine - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Wind Turbine are a part of the Towers of the Wasteland Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528832713018,"sku":"TTWT","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1194.jpg?v=1751359613"},{"product_id":"radar-tesseract-tomb","title":"Radar - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Radar are a part of the Towers of the Wasteland Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528856895802,"sku":"TTWT","price":17.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1183.jpg?v=1751361005"},{"product_id":"armored-mobile-radar-tesseract-tomb","title":"Armored Mobile Radar - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Armored Mobile Radar are a part of the Towers of the Wasteland Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528861483322,"sku":"TTAMR","price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1179.jpg?v=1751361399"},{"product_id":"drill-station-tesseract-tomb","title":"Drill Station - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Drill Station are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528879866170,"sku":"TTDS","price":72.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/resize-untitled-1136.jpg?v=1751362531"},{"product_id":"drill-crawler-tesseract-tomb","title":"Drill Crawler - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Drill Crawler are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528889532730,"sku":"TTDC1","price":58.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/resize-untitled-1129.jpg?v=1751362854"},{"product_id":"excavator-crawler-tesseract-tomb","title":"Excavator Crawler - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Excavator Crawler are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528893595962,"sku":"TTEC","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/resize-untitled-1146.jpg?v=1751365381"},{"product_id":"crane-crawler-tesseract-tomb","title":"Crane Crawler - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThese Crane Crawler are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528937832762,"sku":"TTCC","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/resize-untitled-1142.jpg?v=1751365674"},{"product_id":"refuelling-station-tesseract-tomb","title":"Refuelling Station - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThis Refuelling Station are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eThe pipe connectors on the side of the Refuelling Station are compatible with all of Tesseract Tomb's pipes.\u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528940421434,"sku":"TTCC","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/resize-untitled-1149.jpg?v=1751365892"},{"product_id":"barraks-a-tesseract-tomb-copy","title":"Barracks  - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThis Barraks are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Grey PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Grey PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528948580666,"sku":"TTBA","price":21.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1158.jpg?v=1751366985"},{"product_id":"formans-office-tesseract-tomb","title":"Formans Office  - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThis Formans office are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528978170170,"sku":"TTFO","price":38.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1159.jpg?v=1751367257"},{"product_id":"dump-truck-tesseract-tomb","title":"Dump Truck  - Tesseract Tomb","description":"\u003cp class=\"obj-title\"\u003eThis Dump Truck are a part of the Mining Site Terrain set. This range is perfect for use with the \u003ca href=\"https:\/\/www.warhammer-community.com\/en-gb\/downloads\/necromunda\/\"\u003eAsh Wastes ruleset \u003c\/a\u003e in the \u003ca href=\"https:\/\/www.warhammer.com\/en-AU\/shop\/other-games\/necromunda\"\u003eNecromunda universe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp class=\"obj-title\"\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 12 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Terrain is printed in Black PLA at a 0.2mm layer height this provides a great combination of strength and detail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSets do come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll tower options have a detailed interior, allowing you access to the battlements via the internal stairs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tesseract Tomb","offers":[{"title":"Default Title","offer_id":51528989409594,"sku":"TTDT","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/720X720-untitled-1162.jpg?v=1751367634"},{"product_id":"drunk-tank-w-bar-keeper","title":"Drunk Tank w\/ Bar Keeper","description":"\u003cp\u003eThe Drunk Tank is a mobile bar, rolling on the back of a tank bed, ready to serve the finest hooch in all the lands to any thirsty patrons :D It is a modular kit, and it is cross compatible with our two previous releases (Kebab Krawer and Gribble Engine), so you can mix and match the parts. This kit also comes with a bar keeper.\u003c\/p\u003e\n\u003cp\u003eThis download contains: - \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Drunk Tank kit prints in multiple parts and is glued together using the detailed Build Guide - \u003c\/li\u003e\n\u003cli\u003eBar Keeper \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 5 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSets do not come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed on a 12K resolution printer in a durable but slightly flexible resin that is well suited to miniatures. The resin we use can be carved, filed and cut to some degree without shattering, but do take care to safely hold the model while doing so to do avoid any snapping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin models come fully washed and cured. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWe have a wide range of \u003ca href=\"https:\/\/www.miniaturehorde.com\/collections\/resin-bases\" rel=\"noopener\" target=\"_blank\"\u003edecorated bases\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturehorde.com\/collections\/basing-material\" rel=\"noopener\" target=\"_blank\"\u003ebasing accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto add some extra flare to your miniature!\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eResin Safety Notice - Please read before purchasing!\u003c\/h3\u003e\n\u003cp\u003eResin is a toxic material and care should be taken to ensure that any remaining scraps or filings during the hobby process is cleaned and disposed of properly. Resin can be harmful in contact with eyes or mouth, ensure that resin parts stay away from pets or children. If any amount of resin has been injested, ensure to thoroughly wash any points of contact out with water and contact your doctor if any irritation occurs.\u003c\/p\u003e","brand":"Print Minis","offers":[{"title":"Default Title","offer_id":52111780741434,"sku":"DTWBK","price":75.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/Drunk_20Tank_207.jpg?v=1762953103"},{"product_id":"the-kebab-krawler-w-chef","title":"The Kebab Krawler w\/ Chef","description":"\u003cp\u003eThe Kebab Krawler is a tank crossed with a food truck, selling deliciously spiced kebab meat to the weary traveller! It comes with a Kebab Chef, and the kit is fully cross compatible with our past release of the Gribble Engine, so you can mix and match the parts.\u003c\/p\u003e\n\u003cp\u003eThis Kit contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKebab Krawler (30 parts) with Build Guide\u003c\/li\u003e\n\u003cli\u003eKebab chef\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis miniature kit is from the May 2024 miniature collection available on Patreon and MMF Tribes.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 5 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSets do not come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed on a 12K resolution printer in a durable but slightly flexible resin that is well suited to miniatures. The resin we use can be carved, filed and cut to some degree without shattering, but do take care to safely hold the model while doing so to do avoid any snapping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin models come fully washed and cured. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWe have a wide range of \u003ca href=\"https:\/\/www.miniaturehorde.com\/collections\/resin-bases\" rel=\"noopener\" target=\"_blank\"\u003edecorated bases\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturehorde.com\/collections\/basing-material\" rel=\"noopener\" target=\"_blank\"\u003ebasing accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto add some extra flare to your miniature!\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eResin Safety Notice - Please read before purchasing!\u003c\/h3\u003e\n\u003cp\u003eResin is a toxic material and care should be taken to ensure that any remaining scraps or filings during the hobby process is cleaned and disposed of properly. Resin can be harmful in contact with eyes or mouth, ensure that resin parts stay away from pets or children. If any amount of resin has been injested, ensure to thoroughly wash any points of contact out with water and contact your doctor if any irritation occurs.\u003c\/p\u003e","brand":"Print Minis","offers":[{"title":"Default Title","offer_id":52111780938042,"sku":"TKKWC","price":75.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/kebab-krawler-5.jpg?v=1762953108"},{"product_id":"gribble-engine-with-chef","title":"Gribble Engine with Chef","description":"\u003cp\u003eThis is a tank crossed with a soup kitchen haha, ready to traverse the desert wastes, offering much needed sustenance to the convoys and settlements out there. It also comes with a new version of an older character, a favourite of many of you - Krell, our Protein Chef. He is now posed adding spices to a soup of unknown ingredients, without his grinder backpack, and with added spice pouches. We hope you like him!\u003c\/p\u003e\n\u003cp\u003eThe Gribble Engine is modular, so you can build it in several different ways. There is also detail beneath the floor panels, so you can see the inner workings of the vehicle just peeking through, if you like that sort of thing.\u003c\/p\u003e\n\u003cp\u003eThis Set contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGribble engine (28 parts) with Build Guide\u003c\/li\u003e\n\u003cli\u003eGribble chef\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cspan\u003eAdditional Notes:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed at 28-32mm scale\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrinted kits are printed on demand though should be sent out within 5 business days. Contact us if you are have any questions on the status of your order.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSets do not come with instructions. We recommend these sets only to people with some experience building model kits.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese models are printed on a 12K resolution printer in a durable but slightly flexible resin that is well suited to miniatures. The resin we use can be carved, filed and cut to some degree without shattering, but do take care to safely hold the model while doing so to do avoid any snapping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin and FDM models are best put together using Super Glue\/Cyanoacrylate, plastic glue will typically fail to adhere pieces together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eResin models come fully washed and cured. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA small amount of supports may still remain on the model, make sure to look over each part to remove any supports before painting.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWe have a wide range of \u003ca href=\"https:\/\/www.miniaturehorde.com\/collections\/resin-bases\" rel=\"noopener\" target=\"_blank\"\u003edecorated bases\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.miniaturehorde.com\/collections\/basing-material\" rel=\"noopener\" target=\"_blank\"\u003ebasing accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto add some extra flare to your miniature!\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorldwide shipping is available.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNOT RECOMMENDED FOR PEOPLE UNDER 12 YEARS OLD.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eResin Safety Notice - Please read before purchasing!\u003c\/h3\u003e\n\u003cp\u003eResin is a toxic material and care should be taken to ensure that any remaining scraps or filings during the hobby process is cleaned and disposed of properly. Resin can be harmful in contact with eyes or mouth, ensure that resin parts stay away from pets or children. If any amount of resin has been injested, ensure to thoroughly wash any points of contact out with water and contact your doctor if any irritation occurs.\u003c\/p\u003e","brand":"Print Minis","offers":[{"title":"Default Title","offer_id":52111781134650,"sku":"GEWC","price":70.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0796\/1454\/2138\/files\/gribble-engine-4.jpg?v=1762953112"}],"url":"https:\/\/www.miniaturehorde.com\/collections\/range_wasteland\/pm_vehicles.oembed","provider":"Miniature Horde","version":"1.0","type":"link"}